+31 (0)512 510035 info@trivec.eu

Edge cutter

Compact machine for edge aging wood such as parquet flooring panels or adding or widening the V-groove for wall, ceiling, and floor panelling.

Edge aging of, for example, parquet flooring and wall / ceiling panelling. Almost always used in combination with a brushing machine and/or scraping machine.

Description

The Trivec Edge Cutter is used for the random aging of outer edges of parquet floorboards. The ECB-system (Edge Cutting Blade) in combination with an extensive PLC, workpieces can be hit at random or continuously depending on preferences. The system can be setup via the touchscreen, programs can then be stored in the memory of the system and can be called upon at any moment.

The machine is equipped with a brush module on the 2th position to enable sanding or light structuring of the panelling after aging.

Aspects such as throughput speed, edge cutting speed, type of blade, brush speed, brush pressure, brush type, and blade pressure, many effects are possible. The Edge Cutter can be used as a standalone machine, or in combination with other machines from the Trivec Surface program.

Maximum effective working width

350 mm

Shortest throughput length

300 mm

Workheight

900 mm (+20/-20 mm)

Throughput height

4 – 70 mm

Throughput speed

4 – 15 m/min

Ø Exhaust units

2 x 50 mm and 1x 100 mm

Compressed air connection

Minimum 6 bar

Control

Touchscreen

Marking

CE (UL optional)

Contact form

Filter by solution

Share This