+31 (0)512 510035 info@trivec.eu

Wood brushing machine DB400B2

Wood brushing machine for structuring, brushing, and polishing of surfaces such as wood.

Suitable for creating grain effects on parquet boards, facade wood, beams, furniture panels, scaffolding wood, mouldings, stair treads, kitchen fronts and sheet metal. Can also be used for in-between sanding after a first varnish/stain, for thorough cleaning and/or aging of wood surfaces.

borstel machine DB400B2


The Trivec DB400B2 Wood Brushing Machine is equipped with two or four brush units.

Each unit can be adjusted in angle to maximize sanding and grain-effect results on wooden surfaces. With a central height adjustment as well as a fine adjustment on the following unit(s). Workpieces are transported over the integrated high-grip conveyor. Each brush unit is further equipped with pressure rollers to keep the workpieces stable and enables the processing of smaller workpieces. The heavy duty brush motors can each be separately regulated in speed, as well as rotational direction for creative control. Furthermore, pressure, brush type, angle adjustment and conveyor speed further increase this creative control. Can be equipped with Tynex, messing bundle, messing spiral, Scotch Brite, or sanding brushes.

Additional information

Maximum working width

400 mm

Shortest throughput length

250 mm


900 mm (+20/-20 mm)

Throughput height min - max

4 – 250 mm

Throughput speed

2 – 15 m/min

Brushing units

2 or 4 units with quick change system and angle adjustment

Brush motor power

2/4 x 4,0 kW

Electric connection

400V/ 50Hz/ 16A (3Ph + 0 + ground)

Ø Exhaust units

2/4 x 100 mm

Control system

Via switches on the operating side (touchscreen optional)

Brushing speed

Variable with frequency control on all brushing units

Pressure rolls

2 integrated in brushing units



Contact form