+31 (0)512 510035 info@trivec.eu

Brushing machine with sidebrush

Can be used for structuring, brushing, scraping and cleaning surfaces.

Also usable for intermediate sanding after a first layer of lacquer/stain, for cleaning and/or aging wooden surfaces. Brushing machine for structuring, brushing, and polishing of surfaces such as wood. With 2 horizontal brushes and 1 vertical brush.

Description

The Trivec DB400-FLEX with side brush is equipped with two brush units in a horizontal position and one brush unit in a vertical position. Each horizontal unit can be adjusted in angle to maximize sanding and grain-effect results on wooden surfaces. With a central height adjustment as well as a fine adjustment on the following unit(s).

Workpieces are transported over the integrated high-grip conveyor. Each horizontal brush unit is further equipped with pressure rollers to keep the workpieces stable and enables the processing of smaller workpieces. The vertical brush unit works along side a guiding lineal to keep the workpiece in the right position.

The heavy duty brush motors can each be separately regulated in speed, as well as rotational direction for creative control. Furthermore, pressure, brush type, angle adjustment and conveyor speed further increase this creative control. Can be equipped with Tynex, messing bundle, messing spiral, Scotch Brite, or sanding brushes.

Additional information

Maximum working width

400 mm

Shortest throughput length

250 mm

Workheight

900 mm (+20/-20 mm)

Throughput height min - max

4 – 250 mm

Throughput speed

2 – 15 m/min

Borstelunits

2 or 4, with quick change system and angle adjustment

Brush motor power

2 x 4,0 kW

Ø Exhaust units

2 x 100 mm/ 1x 80 mm

Control

Via switches on the operating side (touchscreen optional)

Brushing speed

Variable with frequency controller on both horizontal brushes

Pressure rolls

Yes, integrated in horizontal brushing units

Marking

CE (UL optional)

Contact form